|
|
Super X2 - tight barrell issue
|
|
My son has a Winchester SuperX2 that is a biatch to get the barrel off. Where the barrel goes into the receiver has always been snug but now us requires tools to separate and put back together. Nothing seems to be bent or damaged. It's like the metal has just swelled. I clean it to the point of shining, so I know it isn't dirt or grime. I only use a tiny amount of fine oil on it.
WTF? Any of you hands had this issue with a shotgun? I hate to spend money at the gunsmith but I would hate to break something, pounding it apart and back together, even more. The gun has otherwise been trouble free.
|
|
|
|
Re: Super X2 - tight barrell issue
|
|
Not sure if this will help, but worth a look at.
Super x2 barrel removal - Refuge Forums
|
dabs
|
|
()
|
|
12/04/14 03:24 PM
|
|
|
|
|
|
|
|
|
Re: Super X2 - tight barrell issue
|
|
I used to have an SX2 and the best thing I found for it was to spray oven cleaner on the magazine tube and the inside of the barrel ring (after all rubber and parts that could be harmed were removed). It seemed to cut that powder burn/carbon build up off real quick.
Just a thought.
|
|
|
|
Re: Super X2 - tight barrell issue
|
|
Quote:
Linhardt said:
Not sure if this will help, but worth a look at.
Super x2 barrel removal - Refuge Forums
Great thread with some great information. Thanks!!
|
